Honeywell Q624A1014 Solid State Spark Generator

The Honeywell Q624A is a Solid State Spark Generator (transformer) for use on commercial or industrial gas burners.

Features:

• Ignites gas pilots with spark gaps up to 1/4 inch (6 millimeters) in length.
• 15,000 volts peak voltage for reliable light off.
• Prevents detection of the ignition spark when properly applied in a flame detection system with the C7027, C7035, or C7044 Minipeeper® or C7061 Dynamic Self-Check Ultraviolet Flame Detector.
• Ignition spark and ultraviolet detector are synchronized by the alternating current supply voltage; spark occurs on one half of the ac cycle and the detector operates on the opposite half cycle.
• Recommended for interrupted ignition applications only.
• Mounts in the same space used by conventional ignition transformer.•
• Q624 mounting holes are the same as standard transformers; no adapter plate needed.
• Impervious to humidity up to 95 percent relative humidity.
• Weighs 3 pounds (1.4 kilograms) versus 8-1/2 pounds (3.9 kilograms) for standard transformers.

• Voltage and Frequency: 120 Vac, 50/60 Hz.
• Output Voltage: 10,000 volts.
• Primary VA Rating: 66 VA at 120 Vac.

• Firing Rage: 60 sparks per second.
• Voltage, peak-to-peak: 22,000 volts nonsinusoidal.
• Firing cycle peak voltage: 15,000 volts ±500 volts, open circuit.
• Energy Discharge: 200 millijoules per spark.
• Discharge Time: 0.3 milliseconds per spark.
• Power Dissipation: approximately 12 watts per second.