1-866-494-4610

Belimo EFB24-MFT 270 In-Lb Spring Return Multi-Function Actuator 24V

Belimo EFB24-MFT 270 In-Lb Spring Return Multi-Function Actuator 24V
Images for general purposes only. Actual may be different than depicted.
Belimo EFB24-MFT 270 In-Lb Spring Return Multi-Function Actuator 24V

Belimo EFB24-MFT 270 In-Lb Spring Return Multi-Function Actuator 24V

SKU: EFB24-MFT
Rating:
Quantity Price Stock
2
2
$667.23     /ea
2

Buy in Bulk & Save

Quantity Price
5 - 9 $627.60 /ea
10+ $587.90 /ea
0
$0.00
0
$0.00
0
EFB24-MFT

The EF..24-MFT actuator provides 95° of rotation and is provided with a graduated position indicator showing 0° to 95°. The actuator will synchronize the 0° mechanical stop or the physical damper mechanical stop and use this point for its zero position during normal control operations. A unique manual override allows the setting of any actuator position within its 95° of rotation with no power applied. This mechanism can be released physically by the use of a crank supplied with the actuator. When power is applied the manual override is released and the actuator drives toward the fail-safe position. The actuator uses a brushless DC motor which is controlled by an Application Specific Integrated Circuit (ASIC) and a microprocessor. The microprocessor provides the intelligence to the ASIC to provide a constant rotation rate and to know the actuator’s exact position. The ASIC monitors and controls the brushless DC motor’s rotation and provides a Digital Rotation Sensing (DRS) function to prevent damage to the actuator in a stall condition. The position feedback signal is generated without the need for mechanical feedback potentiometers using DRS. The actuator may be stalled anywhere in its normal rotation without the need of mechanical end switches. The EF..24-MFT is mounted directly to control shafts up to 1.05” diameter by means of its universal clamp and anti-rotation bracket. A crank arm and several mounting brackets are available for damper applications where the actuator cannot be direct coupled to the damper shaft. The spring return system provides minimum specified torque to the application during a power interruption. The EF..24-MFT actuator is shipped at +5° (5° from full fail-safe) to provide automatic compression against damper gaskets for tight shut-off.

Installation Note: Use flexible metal conduit. Push the UL listed conduit fitting device over the actuator’s cable to butt against the enclosure. Screw in conduit connector. Jacket the actuator’s input wiring with UL listed flexible conduit. Properly terminate the conduit in a suitable junction box. 

Q & A: Ask the Questions, share answers

Do you have questions about this product?